C-L-I-E-N-T-S-I-D-E

Adding Habbos (v30 Update)

DESCRIPTION:
How to add and edit Habbos after the v30 updates.

NEEDED:
Packet Finder/Editor.

HOW:
1.) Load up the Packet Finder/Editor.

2.) Turn the PacketSniffer on and go into a private room with no other Habbos.

3.) There should be coding like below: (Now, how it works now is pretty bizzare, although you still have an i:0 ID you can view it at all...)


This is a translation of the above:


4.) Now you can start changing a few things

N1.) If you don't change the room ID it changes your account (you have to move before you see the change)
N2.) You can now only change the roomID via reloading the room (as far as I can tell)
N3.) Location changing is pretty simple for these - IKQA0.0 for example is "1 3 5 0.0" decrypted (vL64) which is 3away from the wall, 5up from the wall and stacked 0 by 0 (I dono what the one is for)
N4.) All new clones start life as facing Bottom-Right.
N5.) BodyCounter this is a new and weird feature... it appears directly after the @\ header and says how many Habbos are in the room or how many have just entered.

5.) Now you've changed these click send and you will have your clone to start playing around with.

6.) It is also useful to understand simple flatctrls to move and animate your Habbo:

Here is a simple flatctrl:


Which decrypted (vL64) is:


This is its meaning:


N1.) If you change the roomID you will change what clone/Habbo you're dealing with
N2.) If you change the Right, Left, Stack.Stack you are again dealing with placements
N3.) If you change the Head-Turns and Body-Turns you can get your Habbo to face different ways

Also further flatctrls allow you to Wave/Dance/Walk/Talk etc:

Move for example:


Which decrypted (vL64) is:

The mv means move and the numbers are again placement values

Here is a list of other commands:
Dances (Non-HC)
Lays down
Move (need the place to move to)
Sits down
Swims (Lido/RoofTop Rumble only)
Mouth Moves
Waves

Expressions:
Angry
Sad
Smile
Surprised

Also you can make your Clones/Habbos talk clientside using headers:


Shout
Say
Whisper





- Tutorial was written by Alex (Shenk.)
Any errors in this tutorial should be emailed to or reported on the ShoutBox.